Applications of adhesive film Hexis Reference S5461B (French manufacturer)
Hexis SUPTAC 55 000 films are calendered, dimensionally stable, opaque vinyl films developed for all types of medium-term applications or decorations, such as vehicle markings, signs, signage, and window or shop window decorations.
This film is recommended for flat surfaces only.
The advantages of Hexis SUPTAC 55 000 film are:
- Permanent adhesive
- Water and moisture resistant
Hexis reference: S5461B
High-end cutting vinyl Hexis SUPTAC 55,000 for adhesive lettering
Hexis SUPTAC 55,000 films are calendered, dimensionally stable, opaque vinyl films developed for all types of medium-term applications or decorations, such as vehicle markings, signs, and window or shop window decorations.
This film is recommended for flat surfaces only.
Technical characteristics
| Property | Details |
| Material | PVC |
| Manufacturing process | Calendered, polymer |
| Lifespan | 5 to 7 years |
| Resistance | Indoor and Outdoor |
| Appearance | Glossy |
| Thickness | 65 µm |
| Application surface | Flat |
| Application substrates | Glass, metal, varnished wood, paint, certain rigid plastics, aluminum, metal, acrylic |
| Application temperature | 8°C to 30°C |
| Temperature resistance | -40°C to +80°C |
| Usage limitations | |
| | Wavy or highly irregular surfaces, or those with elements such as large rivets or bolt heads |
| | Substrates that do not have a clean and smooth surface, or with weak adhesion between paint and substrate |
| | Stainless steel |
| | Flexible supports |
| | Three-dimensional surfaces |
Instructions for use
Substrate preparation
All surfaces must be cleaned before applying an adhesive film, including freshly painted surfaces.
Do not use oily solvents such as methylated spirits.
Application
Check the temperature of the substrate, which must be between 10°C and 30°C, and the humidity below 80%.
Dry or wet application is possible.
Maintenance
Always wait a week after application before cleaning the marking.
Use the same type of cleaning product as that intended for high-quality painted surfaces. The product must be liquid, non-abrasive, without overly aggressive solvents and must have a pH between 3 and 11 (neither too acidic nor too alkaline).
High-pressure cleaning must comply with certain rules:
- Maximum pressure of 80 bars
- Maximum temperature of 25°C
- Do not position the nozzle less than 30 cm from the surface and 60 cm from welds
- Keep the jet perpendicular to the surface without insisting on the edges.
Removal
The film has a permanent adhesive, so it is difficult to remove.
The use of a heat generator can make it easier to remove the film.
Any residue can be removed with household alcohol, which is strong enough to remove the glue without attacking the substrate.
